I need to remove the TIME from the Date column in my parameter in my SSRS report. I tried to use CONVERT(VARCHAR(10),b.LoanDate,101) with my parameter, but it did not recognize it. Please provide some direction for me to change this. Below are screenshots of my work to this point. LoanDate is my date column.
↧
Remove Time from Date Parameter in SSRS???????????
↧
How can I get list of columns used of specific table in all stored procedure?
How can I get used column list of a specific table in among all stored procedure?
Suppose that,
I have a table(VendorMaster) which has 100 columns just I want to know how many columns used in among all stored procedure.
Suppose that,
I have a table(VendorMaster) which has 100 columns just I want to know how many columns used in among all stored procedure.
↧
↧
On SSRS Export or Print, Select the first 9 columns out of 15 columns
Hello Every1,
My Greetings for the day!!!
I am Hiren Parikh from India.
I am developing a SSRS report (Tablix) which has 15 columns. While developing the report, I have come a crossed a strange requirement.
When the reports gets loaded in SSRS Preview or in Sharepoint, it should display all the 15 columns.
However, if the user exports the same report or print the report in that case only the first 9 (columns 1 to 9)should come and the remaining 6 (columns 10 to 15) should not come in the print or export.
I request you all to suggest me.
Thanks in advance.
Regards,
Hiren Parikh.
Hiren Parikh
↧
SSRS 2012 - Windows Server 2012 R2 issue with OLEDB Connection String
Hoping someone can help. As stated above, we are running SQL Server 2012 with SP1 on Windows Server 2012 R2. When I create a Data Source as follows in Reporting Services, I receive the following error message. Any thoughts on why this fails? The same data source works on Windows Server 2008 R2 Enterprise SQL Server 2008 R2.
Data Source type: OLE DB
Connection string: Provider=Microsoft.ACE.OLEDB.12.0;Data Source="\\networknamehere\CSVFiles";Mode=Read;Extended Properties="text;HDR=YES;FMT=CSVDelimited"
ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CSV_Datasource'. ---> System.Data.OleDb.OleDbException: Unspecified errorat System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at Microsoft.ReportingServices.DataExtensions.ConnectionExtension.Open()
at Microsoft.ReportingServices.Diagnostics.DataExtensionConnectionBase.OpenConnection(IProcessingDataSource dataSourceObj, DataSourceInfo dataSourceInfo, IDbConnection conn)
--- End of inner exception stack trace ---;
↧
Rendering Problem when printing to PDF using PDFCreator.
When I print my report to PDF using PDF Creator it overlays the text over itself vs when i export to pdf and then print it prints it fine, can anyone enlighten me as to why it does this?
↧
↧
About the reporting service account
http://msdn.microsoft.com/en-us/library/ms189964.aspx
1,Based on the technet ,there should be three build-in accountsNetwork Service, Local System, or Local Service,but I see another account "ReportServer" ,what's that?
2,why I can't see that account in DC or local users and groups?
Please click the Mark as Answer button if a post solves your problem!
↧
SSRS report security by expiring its session
Hello all,
We are using SSRS 2008 r2 for Reporting as its financial services company so, too much scope for reporting .
Here, i am facing some problems let to security when users opens report and forget to close anymore report still stay opens for a hours i get suggest that to expired session for report after 10 minutes . How to achieve this please help.
also , instead of login to application users are opening report from browser history .
Dilip Patil..
↧
Date Sorting is not working as expected
Hey,
I am using Report builder 3.0 to create one daily report where I need daily metrics and I am putting it under columns. I want it in day wise order but somehow it shows data in below format. My dates are in M/D/YYYY format. Notice how 1/10 is displayed before 1/2.
Solutions tried -
1. I tried Putting Date as first thing in the Sorting section on matrix.
2. Created Expression in Sort =Day(Fields!Date.Value)
3. Created custom code to prepond 0 to day and month so dates becomes in MM/DD/YYYY format but it is not working.
Query -
SELECT NON EMPTY { [Measures].[Work Item Count] } ON COLUMNS, NON EMPTY { ([Work Item].[System_State].[System_State].ALLMEMBERS * [Date].[Date].[Date].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOMEMBER(@FromDateDate, CONSTRAINED) : STRTOMEMBER(@ToDateDate, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@WorkItemClaimsSandboxTargetVersion, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( { [Work Item].[System_WorkItemType].&[Defect] } ) ON COLUMNS FROM ( SELECT ( { [Team Project].[Team Project Hierarchy].&[{########-####-####-####-############}] } ) ON COLUMNS FROM [Work Item])))) WHERE ( [Team Project].[Team Project Hierarchy].&[{########-####-####-####-############}], [Work Item].[System_WorkItemType].&[Defect], IIF( STRTOSET(@WorkItemClaimsSandboxTargetVersion, CONSTRAINED).Count = 1, STRTOSET(@WorkItemClaimsSandboxTargetVersion, CONSTRAINED), [Work Item].[ClaimsSandbox_TargetVersion].currentmember ) ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
Replaced alphanumeric char with #### above.
Nothing worked. Please help me out here. I am stuck for a month or so. Would appreciate your prompt response.
Thanks in advance,
Shrikant
↧
how to have date parameters nullable in fetch xml crm report
Hi All ;
Below is my report parameter query
<fetch distinct="true" mapping="logical">Date.getTime()<entity name="new_programmeoutput">
CrmDateTime @Search = new CrmDateTime { Value = String.Format("{0:MM/dd/yyyy}", DateTime.Now) };
CrmDateTime @Search1 = new CrmDateTime { Value = String.Format("{0:MM/dd/yyyy}", DateTime.Now) };<attribute name="new_claimdate" /><filter type ="and"><condition attribute="new_claimdate" operator="ge" value="@Search" /><condition attribute="new_claimdate" operator="lt" value="@Search1" /></filter><order attribute="new_claimdate" /></entity></fetch>which works fine if the start date and the end date is entered
but if the start date and end date is made null ... it doesn't display any values
In fact if these ( start date and end date)parameters are made null i need to display all the values in the report irrespective of the date parameters
Any help much appreciated
Thanks
Pradnya07
↧
↧
How to calculate percentage and difference of two values in matrix report in ssrs 2008
Hi everyone,
DB--SQL server
SSRS-2008
I am creating matrix report with grouping on WEEK and Fiscalyearweek,
I need to calculate of difference between FY14W01,FY15W01 ande percentage of those..
how to calculate in ssrs level.
Thank You, Manasa.V
↧
SSRS - Table of Contents With Page Number
Hi!
Is it possible to create a table of contents in SQL Server Reporting Services 2014 with the following aspect:
<w:sdt docparttype="Table of Contents" docpartunique="t" id="1230267000" sdtdocpart="t">Contents<w:sdtpr></w:sdtpr>
Report 1.............................1
Report 2.............................2
Report 3.............................3
</w:sdt>I don't want Hyperlink because this report is to be used printed. I have some urgency in this question.
Thank you for help!!!
↧
How to put a hyperlink to the parameter so it can show on run time report
Hi,
Please help on how to achieve the titled... Thanks
↧
how to deploy reports on production server in SSRS?
Hi,
Now since I have almost completed developing a SSRS report in my local machine ,I would like it to be deployed to a UAT environment.
If I specify the Target server addr as follows : http://[server name]/ReportServer and Deploy the report ,will it work ??
What all initial setup would be required to establish a report server in Development ??
after deployed, will get this error
The permissions granted to user 'LNM-PC\swtest' are insufficient for performing this operation.
any one help me?
↧
↧
SSRS MAtrix - how to centre a title on top of a matrix
I have a matrix report as shown where the Expr is the title to be centred across the matrix..
Then when I preview it or view in asp.net web app it is displayed as below..
As you can see the title isn't centred. There are also a number of other problems -
- I cannot make the page any wider in design view or it adds the white space on at the end and thus expands to more white pages when printed
- For the same reason as above I'm limited in the size I can make the footer to the width of the 'design' view document and not the finished doc with all the headings
Searching the internet has resulted in: MAke a list and create your matrix inside the list. I couldn't get this to work by copying and pasting it and I'm not recreating the matrix. Also another site said to expand the title across the length of the report as it would be displayed - this doesn't work as it creates white pages in print view.
I had no idea how primitive SSRS was or I'd have just stuck to doing everything in ASP.NET.
Any help would be much appreciated, thanks
↧
Poor Processing Performance after Migration from SSRS 2005 to SSRS 2014
Hello all,
a customer is moving from SQL Server 2005 to SQL Server 2014 (clean install on a new machine). There are a lot of reports against an Analysis Services database. I have converted and deployed the reports. Most of them are showing a significant performance improvement, but some of them became very slow.
Analyzing the report server's execution log I have discovered that the rendering time has increased very much (see picture for a specific report below - above the blue line is SSRS 2005 on an older machine, below is SSRS 2014 on a new machine).
Do you have any hints what I can do?
Thanks in advance and best regards,
Gerald
↧
which BIDS/VS version should I use?
We have a SQL Server running SSRS:
Microsoft SQL Server 2008 (SP3) - 10.0.5520.0 (X64)
Jul 11 2014 16:11:50
Copyright (c) 1988-2008 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2) (VM)
I need to update some SSRS reports, however, using Visual Studio 2010 as my ‘development’ platform causes issues when I try and re-load the .rdl file up to the server. I get an error about the namespaces not compatible. I’m assuming because I used VS 2010 to make my changes and not VS 2008. My question is if we were to upgrade the SQL Server from the version above to say 2012 would the reports be forward compatible? Is there a better upgrade path? Should I just get a 2008 version of VS (BIDS) and make changes there? Any help/ideas would be greatly appreciated.
↧
Column Grouping By Month
Hello. Here's my data set:
I'm trying to produce a Reporting Services report that displays counts by month -- but for both calls open and closed under a single month heading. For example:
I don't see a straightforward way to do this. I'm using a Tablix in SSRS 2008 R2. I can easily group counts by months if I'm working with just one column (just the open or closed date), but this isn't so clean. I appreciate any ideas. Thank you.
↧
↧
Custom Data Processing Extension and Parameters
Hello,
I have successfully implemented a custom data processing extension. Now I'm trying to add parameters, but the documentation is very weak on this topic. Also all examples of custam data processing extensions I have found so far are working without parameter support. Using a search engine I have found a custom data processing extension's sequence diagram during report execution. The related article also gives some hints about the IDbCommandAnalysis interface.
The GetParameters implementation creates a parameter collection based on the current command text and returns this collection. So far no problem.
My question is how to implement the IDbCommand's CreateParameter method and Parameters property? In CreateParameter I just return a new instance of my IDataParameter implementation, and the Parameters property returns a new parameter collection based on the current command text.
Is this ok so? At least this is the first implementation which seems to work in the data designer. If I share an instance variable for GetParameters and Parameters I will either get all parameters twice or BIDS will crash when pressing the execute button in the dataset designer - depending on my actual implementation.
What I'm still missing is how to get the parameters added automaticall to the dataset's properties parameter register?
thanx in advance and kind regards, Gerald
↧
Columns not outputting from my stored procedure in my SSRS Report Data set ???????????
My columns are not outputting from my stored procedure in my SSRS Report Data set. How can get my columns that are in my stored procedure to show? My work is below.
↧
How to corretly show the total pages when a list of data
Hi,
I notice the report result only show 1 of 2? when I click on the View Report in the first place. Indeed, the returned result are spreaded to 4 pages... The user needs to click >| button in order to go to the last page and click |< back to the 1st page so he can realised the result does have 4 pages and it is very misleading.....
Any way to fix this ...?! Thanks in advance ...
↧